Sunday, April 15, 2012

GenTran 50 Amp 4-wire 125/250-Volt Non-Metallic Generator Power Inlet Box CS6365

GenTran 50 Amp 4-wire 125/250-Volt Non-Metallic Generator Power Inlet Box CS6365 Review



GenTran 50 Amp 4-wire 125/250-Volt Non-Metallic Generator Power Inlet Box CS6365 Feature

  • 50 Amp non-metallic power inlet box; UL listed for generators up to 12500 watts
  • Durable, glass-filled nylon NEMA 3r-rated enclosure includes 4-wire, 50amp 125/250v male inlet in configuration cs6365 on bottom
  • High-impact, UV stabilized, glass-filled nylon resin; 99-Inches of wiring room and 6 knockouts provide ultimate wiring flexibility
  • Since generator connection is made on the bottom, these power inlet boxes retain the "rain tight" rating while in use
  • A sloped top and posts on the back allow precipitation to drain off
Use a power inlet box when you need to plug in your generator outdoors to connect to a transfer switch indoors. This non-metallic power inlet box is mounted on the exterior of a house or building, and your installer will run wire through the wall over to the transfer switch. Rated at 50-Amps for generators up to 12500-watt, this NEMA 3R-rated non-metallic enclosure is made from durable, glass-filled nylon and includes a 50-Amp 125/250-Volt male inlet in configuration CS6365 on bottom - so it retains a raintight rating when cord is connected, required by most inspectors. Works with any transfer switch rated at 50-Amps. This model does not include a flip lid. UL Listed.


No comments:

Post a Comment